oil pressure Citroen C4 PICASSO 2008 1.G Owner's Manual

12
A
190
VI
The puncture repair kit is a complete system including a compressor and a setting product.
It allows you to temporarily repair the tyre, to enable you to drive to your nearest garage.
Depending on model, it is located either in the boot well or in the compartment under the left hand second-row passenger (open the fl ap by turning the screw a quarter turn).
Using the puncture repair kit
1. Affi x a speed limit sticker on the affected wheel, and one on the steering wheel, to re-mind you that you are driving with a wheel that is only fi t for temporary use.
2. Clip the fl ask 1 on the com-pressor 2.
3. Connect the fl ask 1 to the valve of the tyre to be repaired.
4. Connect the compressor pipe to the fl ask.
5. Connect the electric cable to one of the vehicle’s 12V sockets.
6. Operate the compressor by pressing the button A until the pressure in the tyre reaches 2.0 bars. If you cannot make the pressure attain this level, then the tyre is not repairable.
7. Remove and stow the com-pressor.
8. Drive immediately for a few miles at reduced speed, in or-der for the repair to set.
9. Adjust the tyre pressure to the normal level for the vehicle, checking that there is no air es-caping (no loss of pressure).
10. Drive at reduced speed (80 km/h / 50 mph).
Visit a CITROËN dealer as soon as possible.
You must inform the technician that you have used the puncture repair kit to repair the tyre and give him its user guide.
Warning, the fl ask of puncture repair gel contains ethylene-glycol, a product that is toxic if ingested and irritating for the eyes.
Keep out of reach of children.
After use, do not dispose of the fl ask in the environment, but return it to a CITROËN dealer or alternatively to a recognised recovery facility.
This repair kit is available from a CITROËN dealer.
P U N C T U R E R E P A I R K I T
Note : After use, the fl ask should be stored in a plastic container (provided in the kit), so as not to soil your vehicle with residues of the fl uid.